c. The soundboard shall be a Yamaha M7CL-48ES console with the following
accessories: Three SB-168ES stage input boxes, MBM7CL meter bridge, PSL360
redundant power supply, MY8AD24CA input card, and MY16-CII CobraNet card.
The SB-168ES units shall be located in the stage rack location. The soundboard shall
be configured to control the monitor speakers through Aux sends, and provide the
additional capability of running subwoofer content on an Aux channel (to the “Aux
Subwoofer” amplifier and plates”).
d. The DSP processing shall be BSS Audio’s London Soundweb hardware. A BLU-320
shall reside in the Booth rack providing CobraNet input and analog I/O for the booth.
A BLU-160 shall provide central processing for the audio system. A BLU-120 shall
provide analog and digital outputs to amplifiers.
The DSP shall be programmed to provide the following capabilities:
i. Automix capabilities for four wireless mics and any mics labeled “Crestron
System” on the input plates (12 total). Audio from the video system shall be
included in the Automix section.
ii. The ability for the sound engineer to run the system with the Aux Sub signal
derived from the main Left and Right outputs of the soundboard or from an
Aux output. This preset shall be recalled through the Crestron control system.
iii. Provide a “Mix Output” that shall be distributed from either the Automix
section or from the manual section.
iv. Provide a separately processed output for Lobby Paging
v. Provide a separately processed output for a hearing assistance system furnished
by owner.
vi. Provide a separately processed output for a program feed for the Clear Com
system
e. Lobby audio shall be a Crown CDi 1000 amplifier driving six 24CT micro speakers
mounted in the ceiling of the first and second floor lobby (three each)
f. Source Devices
i. Nemark iDEC iPod dock located in the sound board rack
ii. Tascam CD-500B CD players (x2) located in the sound board rack
iii. Shure MX418SC mounted to the podium (podium furnished by owner)
g. Custom Cabling, Floor Boxes and plates
i. A custom Whirlwind snake shall have a W1 male connector on one end. The
other end shall be 8 female XLR connectors and 4 ¼” TRS connectors. It shall
be 12’ long
ii. An FSR FL-540P-6 with FL-540P-BLK-C cover shall be installed flush to the
stage as indicated in the AV drawings. The four gang opening shall be for AV
(16 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern